AquaCal TropiCal T135 Pool Heat Pump (Heat Only)
Rating is 0.0 out of five stars based on reviews
$4,933.00Price
- 132,000 BTU
- Year Warranty Included
- Made in the USA
Get the most out of your pool heating investment!
High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models)
- Microprocessor controlled defrost cycle allows operation down to mid to low 40s °F
- Built-in drain pan for condensate management
- Impact resistant, rust and fade proof cabinet
- Quieter than conventional heat pumps
- NEW Smart Microprocessor Control
Weather protected microprocessor control with water temperature setpoint dial (60°-104° F), easy to use and compatible with most external controllers
Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings
Ability to connect to most external controllers
Rated in accordance with AHRI standard 1160.
Specitications
Specs 60Hz
| BTUs | T90 |
|---|---|
| 80/80/80 | 96,000 |
| 80/80/63 | 90,000 |
| 80/50/63 | 65,000 |
| Coefficient of Performance | |
| 80/80/80 | 6.0 |
| 80/80/63 | 5.8 |
| 80/50/63 | 4.2 |
| Refrigerant | R410A |
| Heat Exchanger | ThermoLink® |
| Electrical | |
| kW Input | 4.7 |
| Voltage/Hz/Phase | 208-230/60/1 |
| Minimum Circuit Ampacity | 40.2 |
| Maximum Fuse Size | 60 |
| *Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications. | |
| Water Flow | |
| Minimum/Maximum (gpm) | 30/70 |
| *A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135. | |
| Physical | |
| Weight (lbs) | 231 |
| Length x Width x Height (in) | 34″ x 34″ x 39″ |
| Shipping | |
| Weight (lbs) | 271 |
| Length x Width x Height (in) | 37″ x 36″ x 45″ |
|
Rated in accordance with AHRI standard 1160 water temp/ambient air/relative humidity |
